VIA 1.5 PLUS
VIA 1.5 PLUS combines the elegance of Via 1.5 with the added architectural element of a lens which protrudes ½" below the surface plane. VIA 1.5 PLUS is available as individual or continuous recessed runs for both drywall and grid ceilings.
SIZE: 1 1/2" x 3 3/4"
LIGHT SOURCE: LED
MOUNTING: RECESSED, SURFACE, PENDANT, WALL, WALL-RECESSED
LIGHT DISTRIBUTION: DIRECT
CHROMATICITY: DUO CHROMAWERX, SOLA CHROMAWERX, QUADRO CHROMAWERX, STATIC WHITE
COLOR TEMPERATURE: 3000k, 3500k, 2700k, 4000k, 6500k
HIGH EFFICIENCY LAMBERTIAN OPTIC (HLO) - matte white side reflectors combined with High-Efficiency Lambertian Optic (HLO) shielding of diffusing 0.075" thick acrylic with up to 88% transmission and good source obscuration. Luminaire brightness is controlled by the flux-to-shielding area ratio.
ChromaWerx Sola is single-channel control that dims output while warming the color temperature in a pre-determined relationship. A simple digital or analog control sends a common signal to dual output digital drivers, which are programmed to adjust a specially populated LED array to emulate the effect of dimming a filament source. Dimming range is programmable but the default option runs from 3500K at 100% of full power to 2700K at 5% of full power. CRI is maintained above 80 throughout the dimming range.
ChromaWerx Duo is two-channel control. It uses analog or digital protocols for synchronous control of both warm and cool LED arrays, enabling the user to set color temperature and light output. Commonly called “tunable white”, ChromaWerx two-channel control provides the range of warm (2700K) to cool (6500K) color that can be useful for helping to entrain circadian rhythms, stimulate alertness for improved educational and work productivity, and compensate for jet lag, among other applications. The ChromaWerx drivers are programmed to limit maximum light output and power usage across all color temperatures. CRI is maintained above 80.
ChromaWerx Quadro is a four-channel control that operates an RGBW LED array and addresses the need for more expressive color in architectural applications. The DMX driver supports familiar programming tools for both dynamic multi-hued color and precise white color point control. While a typical user interface will be a DMX controller by others, LumenWerx also offers a simple control station for stand-alone color changing applications.