Product Page

VIA 1.5

Direct, Indirect and Direct/Indirect

Via 1.5 is the elegant, ultra-compact and flexible linear LED luminaire system for pendant, surface, and recessed or in-wall installation, whether as discrete luminaires, continuous runs, or patterns. Via 1.5 features numerous optical configurations, flush and drop diffusers as well as other light distributions, including wall washing and asymmetric optics, which are difficult to achieve in such a compact luminaire.

SPECIFICATIONS

SIZE: 1 1/2" x 3 3/4" - 1 1/2" x 4 1/4"

LIGHT DISTRIBUTION: DIRECT, INDIRECT, DIRECT/INDIRECT, WALL WASH, ASYMMETRIC DIRECT

CHROMATICITY: STATIC WHITE, DUO CHROMAWERX, SOLA CHROMAWERX, QUADRO CHROMAWERX

LIGHT SOURCE: LED

COLOR TEMPERATURE: 2700k, 3000k, 3500k, 4000k, 6500k

MOUNTING: RECESSED, SURFACE, PENDANT, WALL, WALL-RECESSED

OPTICS: ARO, HLO, WRO

 

OPTICS

HIGH EFFICIENCY LAMBERTIAN OPTIC (HLO) - matte white side reflectors combined with High-Efficiency Lambertian Optic (HLO) shielding of diffusing 0.075" thick acrylic with up to 88% transmission and good source obscuration. HLO is available as a flush diffuser or as a drop diffuser, extending 0.5" or 1.5" below the luminaire housing. Luminaire brightness is controlled by the flux-to-shielding area ratio.

WALL WASH REFLECTOR OPTIC (WRO) - delivers smooth vertical illumination down the wall with a gentle, monotonic gradient. Peak intensity directed to the wall is achieved at 20º from vertical and is more than six times the intensity above 75º. WRO uses a specular aluminum reflector, combined with a high-transmission diffusing film. An optional “visor” shields luminaire hardware from lateral viewing angles.

ASYMMETRIC REFLECTOR OPTIC (ARO) has a split light distribution: a modified lambertian distribution with peak intensity at nadir to one side and batwing with peak intensity at 40º to the other. ARO uses a matte finished reflector combined with a high-transmission diffusing film. An optional “visor” shields luminaire hardware from lateral viewing angles. ARO is also available in an indirect distribution.

PATTERNS

At LumenWerx, we make it simple to design patterns customized for you. Whether surface, wall mount, pendant or recessed – or even a combination of different mounting types, we make it easy to achieve the results you’re looking for. While our standard is a 90 degree corner, we can customize angles to suit your needs.

CHROMAWERX

ChromaWerx Sola is single-channel control that dims output while warming the color temperature in a pre-determined relationship. A simple digital or analog control sends a common signal to dual output digital drivers, which are programmed to adjust a specially populated LED array to emulate the effect of dimming a filament source. Dimming range is programmable but the default option runs from 3500K at 100% of full power to 2700K at 5% of full power. CRI is maintained above 80 throughout the dimming range.

ChromaWerx Duo is two-channel control. It uses analog or digital protocols for synchronous control of both warm and cool LED arrays, enabling the user to set color temperature and light output. Commonly called “tunable white”, ChromaWerx two-channel control provides the range of warm (2700K) to cool (6500K) color that can be useful for helping to entrain circadian rhythms, stimulate alertness for improved educational and work productivity, and compensate for jet lag, among other applications. The ChromaWerx drivers are programmed to limit maximum light output and power usage across all color temperatures. CRI is maintained above 80.

ChromaWerx Quadro is a four-channel control that operates an RGBW LED array and addresses the need for more expressive color in architectural applications. The DMX driver supports familiar programming tools for both dynamic multi-hued color and precise white color point control. While a typical user interface will be a DMX controller by others, LumenWerx also offers a simple control station for stand-alone color changing applications.