Ubik is one of the most commanding 2” aperture luminaires on the market, packing a powerful punch of up to 1600 lumens per foot. With five standard lumen packages, Ubik also has the flexibility to illuminate many types of spaces. And if that weren’t enough, optics are interchangeable within the same linear run, allowing for even more creative options.
- Up to 1600 lm/ft
- Low glare with a UGR of 6
- 145 lm/W (HLO)
- Optical flexibility with parabolic louvers, HLO, wall wash or blanks
LIGHT SOURCE: LED
LIGHT DISTRIBUTION: DIRECT
CHROMATICITY: STATIC WHITE, DUO CHROMAWERX, SOLA CHROMAWERX
COLOR TEMPERATURE: 2700k, 3000k, 3500k, 4000k
OPTICS: BPL, HLO, MPL, SPL, WPL, WRO
The High-Efficiency Lambertian Optic (HLO) shielding of diffusing 0.075" thick acrylic with up to 88% transmission and good source obscuration is combined with matte white side reflectors to create an efficient optical chamber with uniform luminosity. Luminaire brightness is controlled by the flux-to-shielding area ratio. For visual comfort, avoid high lumen output unless Ubik is installed in a high ceiling application.
Parabolic louvers provides excellent shielding and a pleasing crisp visual texture. The precisely molded louvers consist of 1" deep blades and is 2”x2” in size. The LED array is secured in the direct position, with the light transmitting through a beam-forming lens creating a conical distribution. Three matte (MPL) finishes are available in black, white and silver, offering a soft appearance, a wide beam spread of up 85-91 degrees, gentle brightness transition at cut-off, and exceptional UGR.
Ubik wall wash is an offset horizontal linear LED array that reflects from a matte white internal side kicking reflector. It then transmits through the beam-forming lens and then softened by a 2” asymmetric louver. The lens is fully illuminated, and the wall wash is only slightly angled to complement the direct optic.
Chromawerx Sola is single-channel control that dims output while warming the color temperature in a pre-determined relationship. A simple digital or analog control sends a common signal to dual output digital drivers, which are programmed to adjust a specially populated LED array to emulate the effect of dimming a filament source. Dimming range is programmable but the default option runs from 3500K at 100% of full power to 2700K at 5% of full power. CRI is maintained above 80 throughout the dimming range.
Chromawerx Duo is two-channel control. It uses analog or digital protocols for synchronous control of both warm and cool LED arrays, enabling the user to set color temperature and light output. Commonly called “tunable white”, Chromawerx two-channel control provides the range of warm (2700K) to cool (6500K) color that can be useful for helping to entrain circadian rhythms, stimulate alertness for improved educational and work productivity, and compensate for jet lag, among other applications. The Chromawerx drivers are programmed to limit maximum light output and power usage across all color temperatures. CRI is maintained above 80.
PoE technology can be integrated into many of Lumenwerx’s lighting solutions and product families. For nodes, we always aim for complete integration, but when space is limited, we look for a remote solution that doesn’t compromise the design aesthetic. PoE can be integrated into 95% of our product offering, including our Chromawerx solutions. See PoE webpage