VIA 2 ACOUSTIX
Direct, Indirect, Direct/Indirect
Precision designed with esthetics in mind, Via Acoustix luminaires feature sound-absorbing felt, mitered seams, and regressed end caps within single, continuous, and cost-effective units that integrate effortlessly into open architectural spaces.
Via Acoustix fixtures are also available in pre-assembled X and Y spoke shapes, created by linear units mitered together. Shipped directly from factory, the spokes not only incorporate all of the features that have made the Via family so successful, including our High-Efficiency Lambertian Optic (HLO), but they also possess the ability to dampen noise reverberation.
LIGHT SOURCE: LED
LIGHT DISTRIBUTION: DIRECT, INDIRECT, DIRECT/INDIRECT, WIDESPREAD
CHROMATICITY: STATIC WHITE, DUO CHROMAWERX, SOLA CHROMAWERX, QUADRO CHROMAWERX
OPTICS: HLO, WIO2
High Efficiency Lambertian Optics (HLO) shielding of diffusing 0.075" thick acrylic with up to 88% transmission and good source obscuration. Luminaire brightness is controlled by the flux-to-shielding area ratio.
Widespread Indirect Optics (WIO2) - Vertically oriented LED arrays couple light into a linear light guide. A specially designed TIR/microstructure extracts light into the desired “batwing” distribution with smooth ceiling brightness and wide spacing.
Chromawerx Sola is single-channel control that dims output while warming the color temperature in a pre-determined relationship. A simple digital or analog control sends a common signal to dual output digital drivers, which are programmed to adjust a specially populated LED array to emulate the effect of dimming a filament source. Dimming range is programmable but the default option runs from 3500K at 100% of full power to 2200K at 5% of full power. CRI is maintained above 80 throughout the dimming range.
Chromawerx Duo is two-channel control. It uses analog or digital protocols for synchronous control of both warm and cool LED arrays, enabling the user to set color temperature and light output. Commonly called “tunable white”, Chromawerx two-channel control provides the range of warm (2700K) to cool (6500K) color that can be useful for helping to entrain circadian rhythms, stimulate alertness for improved educational and work productivity, and compensate for jet lag, among other applications. The Chromawerx drivers are programmed to limit maximum light output and power usage across all color temperatures. CRI is maintained above 80.
Chromawerx Quadro is a four-channel control that operates an RGBW LED array and addresses the need for more expressive color in architectural applications. The DMX driver supports familiar programming tools for both dynamic multi-hued color and precise white color point control. While a typical user interface will be a DMX controller by others, Lumenwerx also offers a simple control station for stand-alone color changing applications.
PoE technology can be integrated into many of Lumenwerx’s lighting solutions and product families. For nodes, we always aim for complete integration, but when space is limited, we look for a remote solution that doesn’t compromise the design aesthetic. PoE can be integrated into 95% of our product offering, including our Chromawerx solutions. See PoE webpage